|
|
Post by G.modi on Nov 26, 2020 2:55:14 GMT
[Note:- Widows Application starts in minimized mode, to access application click on wifiaudio app icon in taskbar]WiFiAudio Server for Windows Vista/7/8/8.1 and Windows 10
Download Link for Windows Server
View Attachment
[Note few browsers blocks downloading of "zip" file, if you faced this issue then download the file from link mentioned below and change the extension from "png" to zip]
View Attachment
WiFiAudio Server for Linux 64bit
Download Link for Linux
View AttachmentAfter download execute chmod +x wifiaudio_linux command to add executable permission How to use With this Android application you can use your Android device as a wireless speaker.  New Features in Windows Server :- 1) Auto start at bootup 2) Auto discover mobile device (Needs firewall exception for port 32000 in Windows Firewall) 3) Remember last used IP address and auto start audio transmission if IP address is stored. Linux Server :- 1) Auto discover mobile device 2) Movie mode for very low latency audio. How it works: Download Windows or Linux executable on your machine depending on the OS a) Run WiFi Audio Android App and Press start, you will see IP address of mobile device in the bottom after that run Windows/Linux application and put mobile device's IP address in the IP address field and then press start on PC application. Now all audio coming out from PC will be send to mobile device and you will hear audio on mobile device. b) This version also supports auto-discover function it will work in following conditions 1) Users has to allow incoming packets from port 32000 on the PC, For Windows user has to add exception for either application executable or for the port 32000. On Linux following command will add exception for port 32000 iptables -I INPUT -p udp --dport 32000 -j ACCEPT or users can use firewalld to add exception permanently. (Note: to run iptables command root permission is required on Linux) Requirements: Windows Vista or above Linux PC with Pulse Audio (64bit version only) |
|
|
|
Post by pidagasan89 on Nov 30, 2020 13:05:51 GMT
Sometime after my phone screen time out, the audio cuts of. It comes back when I open the app again, but its still annoying. Same, any solution? |
|
amalc
New Member
Posts: 1
|
Post by amalc on Dec 1, 2020 7:20:40 GMT
i run a dual boot system(windows & linux).i did all the neccessary steps in both the os's but there is no audio
output in the linux system.it does say its connected to the ip but no sound?
a bit background about the system.its inbuilt speakers are defunct & audio out is broken,so i stream the audio to my phone.
|
|
|
|
Post by Deividy on Dec 3, 2020 15:17:08 GMT
[Note:- Widows Application starts in minimized mode, to access application click on wifiaudio app icon in taskbar]WiFiAudio Server for Windows Vista/7/8/8.1 and Windows 10
Download Link for Windows Server
View Attachment
[Note few browsers blocks downloading of "zip" file, if you faced this issue then download the file from link mentioned below and change the extension from "png" to zip]
View Attachment
WiFiAudio Server for Linux 64bit
Download Link for Linux
View AttachmentAfter download execute chmod +x wifiaudio_linux command to add executable permission How to use With this Android application you can use your Android device as a wireless speaker. New Features in Windows Server :- 1) Auto start at bootup 2) Auto discover mobile device (Needs firewall exception for port 32000 in Windows Firewall) 3) Remember last used IP address and auto start audio transmission if IP address is stored. Linux Server :- 1) Auto discover mobile device 2) Movie mode for very low latency audio. How it works: Download Windows or Linux executable on your machine depending on the OS a) Run WiFi Audio Android App and Press start, you will see IP address of mobile device in the bottom after that run Windows/Linux application and put mobile device's IP address in the IP address field and then press start on PC application. Now all audio coming out from PC will be send to mobile device and you will hear audio on mobile device. b) This version also supports auto-discover function it will work in following conditions 1) Users has to allow incoming packets from port 32000 on the PC, For Windows user has to add exception for either application executable or for the port 32000. On Linux following command will add exception for port 32000 iptables -I INPUT -p udp --dport 32000 -j ACCEPT or users can use firewalld to add exception permanently. (Note: to run iptables command root permission is required on Linux) Requirements: Windows Vista or above Linux PC with Pulse Audio (64bit version only) |
|
|
|
Post by fgseh on Dec 3, 2020 16:57:10 GMT
[Note:- Widows Application starts in minimized mode, to access application click on wifiaudio app icon in taskbar]WiFiAudio Server for Windows Vista/7/8/8.1 and Windows 10
Download Link for Windows Server
View Attachment
[Note few browsers blocks downloading of "zip" file, if you faced this issue then download the file from link mentioned below and change the extension from "png" to zip]
View Attachment
WiFiAudio Server for Linux 64bit
Download Link for Linux
View AttachmentAfter download execute chmod +x wifiaudio_linux command to add executable permission How to use With this Android application you can use your Android device as a wireless speaker. New Features in Windows Server :- 1) Auto start at bootup 2) Auto discover mobile device (Needs firewall exception for port 32000 in Windows Firewall) 3) Remember last used IP address and auto start audio transmission if IP address is stored. Linux Server :- 1) Auto discover mobile device 2) Movie mode for very low latency audio. How it works: Download Windows or Linux executable on your machine depending on the OS a) Run WiFi Audio Android App and Press start, you will see IP address of mobile device in the bottom after that run Windows/Linux application and put mobile device's IP address in the IP address field and then press start on PC application. Now all audio coming out from PC will be send to mobile device and you will hear audio on mobile device. b) This version also supports auto-discover function it will work in following conditions 1) Users has to allow incoming packets from port 32000 on the PC, For Windows user has to add exception for either application executable or for the port 32000. On Linux following command will add exception for port 32000 iptables -I INPUT -p udp --dport 32000 -j ACCEPT or users can use firewalld to add exception permanently. (Note: to run iptables command root permission is required on Linux) Requirements: Windows Vista or above Linux PC with Pulse Audio (64bit version only) |
|
|
|
Post by deepika on Dec 8, 2020 5:05:59 GMT
Give permission
|
|
|
|
Post by dfghjklş on Dec 11, 2020 19:51:07 GMT
[Note:- Widows Application starts in minimized mode, to access application click on wifiaudio app icon in taskbar]WiFiAudio Server for Windows Vista/7/8/8.1 and Windows 10
Download Link for Windows Server
View Attachment
[Note few browsers blocks downloading of "zip" file, if you faced this issue then download the file from link mentioned below and change the extension from "png" to zip]
View Attachment
WiFiAudio Server for Linux 64bit
Download Link for Linux
View AttachmentAfter download execute chmod +x wifiaudio_linux command to add executable permission How to use With this Android application you can use your Android device as a wireless speaker. New Features in Windows Server :- 1) Auto start at bootup 2) Auto discover mobile device (Needs firewall exception for port 32000 in Windows Firewall) 3) Remember last used IP address and auto start audio transmission if IP address is stored. Linux Server :- 1) Auto discover mobile device 2) Movie mode for very low latency audio. How it works: Download Windows or Linux executable on your machine depending on the OS a) Run WiFi Audio Android App and Press start, you will see IP address of mobile device in the bottom after that run Windows/Linux application and put mobile device's IP address in the IP address field and then press start on PC application. Now all audio coming out from PC will be send to mobile device and you will hear audio on mobile device. b) This version also supports auto-discover function it will work in following conditions 1) Users has to allow incoming packets from port 32000 on the PC, For Windows user has to add exception for either application executable or for the port 32000. On Linux following command will add exception for port 32000 iptables -I INPUT -p udp --dport 32000 -j ACCEPT or users can use firewalld to add exception permanently. (Note: to run iptables command root permission is required on Linux) Requirements: Windows Vista or above Linux PC with Pulse Audio (64bit version only) |
|
|
|
Post by fuckyoufgb on Dec 12, 2020 23:29:29 GMT
FUCK YPOIU£µ
RETGLMKNBOZEGIBFOHZEF
¨P
|
|
frizzo144-at-gmail-dot-com
Guest
|
Post by frizzo144-at-gmail-dot-com on Dec 13, 2020 3:34:45 GMT
Hey I really like this app, but I want to dedicate this old phone I have to it's purpose. The phone was my kid's, so it's kind of busted up, but it will work for this. I can't get on the playstore with it (local network is OK). This is about all the thing is good for, and I don't want to use a good device just for this. Is there anyway I could get the APK? I could install to a good phone & use some apk extractor, but it's easier just to ask. I think I bought it already, I have it now on every (good) phone, but I want to dedicate a junk phone. Thanks!
|
|
|
|
Post by Wendy perpignan on Dec 13, 2020 15:27:53 GMT
[Note:- Widows Application starts in minimized mode, to access application click on wifiaudio app icon in taskbar]WiFiAudio Server for Windows Vista/7/8/8.1 and Windows 10
Download Link for Windows Server
View Attachment
[Note few browsers blocks downloading of "zip" file, if you faced this issue then download the file from link mentioned below and change the extension from "png" to zip]
View Attachment
WiFiAudio Server for Linux 64bit
Download Link for Linux
View AttachmentAfter download execute chmod +x wifiaudio_linux command to add executable permission How to use With this Android application you can use your Android device as a wireless speaker. New Features in Windows Server :- 1) Auto start at bootup 2) Auto discover mobile device (Needs firewall exception for port 32000 in Windows Firewall) 3) Remember last used IP address and auto start audio transmission if IP address is stored. Linux Server :- 1) Auto discover mobile device 2) Movie mode for very low latency audio. How it works: Download Windows or Linux executable on your machine depending on the OS a) Run WiFi Audio Android App and Press start, you will see IP address of mobile device in the bottom after that run Windows/Linux application and put mobile device's IP address in the IP address field and then press start on PC application. Now all audio coming out from PC will be send to mobile device and you will hear audio on mobile device. b) This version also supports auto-discover function it will work in following conditions 1) Users has to allow incoming packets from port 32000 on the PC, For Windows user has to add exception for either application executable or for the port 32000. On Linux following command will add exception for port 32000 iptables -I INPUT -p udp --dport 32000 -j ACCEPT or users can use firewalld to add exception permanently. (Note: to run iptables command root permission is required on Linux) Requirements: Windows Vista or above Linux PC with Pulse Audio (64bit version only) |
|
|
|
Post by servern on Dec 16, 2020 6:00:38 GMT
Thank you so much !!
|
|
|
|
Post by cevahir on Dec 18, 2020 17:18:21 GMT
[Note:- Widows Application starts in minimized mode, to access application click on wifiaudio app icon in taskbar]WiFiAudio Server for Windows Vista/7/8/8.1 and Windows 10
Download Link for Windows Server
View Attachment
[Note few browsers blocks downloading of "zip" file, if you faced this issue then download the file from link mentioned below and change the extension from "png" to zip]
View Attachment
WiFiAudio Server for Linux 64bit
Download Link for Linux
View AttachmentAfter download execute chmod +x wifiaudio_linux command to add executable permission How to use With this Android application you can use your Android device as a wireless speaker. New Features in Windows Server :- 1) Auto start at bootup 2) Auto discover mobile device (Needs firewall exception for port 32000 in Windows Firewall) 3) Remember last used IP address and auto start audio transmission if IP address is stored. Linux Server :- 1) Auto discover mobile device 2) Movie mode for very low latency audio. How it works: Download Windows or Linux executable on your machine depending on the OS a) Run WiFi Audio Android App and Press start, you will see IP address of mobile device in the bottom after that run Windows/Linux application and put mobile device's IP address in the IP address field and then press start on PC application. Now all audio coming out from PC will be send to mobile device and you will hear audio on mobile device. b) This version also supports auto-discover function it will work in following conditions 1) Users has to allow incoming packets from port 32000 on the PC, For Windows user has to add exception for either application executable or for the port 32000. On Linux following command will add exception for port 32000 iptables -I INPUT -p udp --dport 32000 -j ACCEPT or users can use firewalld to add exception permanently. (Note: to run iptables command root permission is required on Linux) Requirements: Windows Vista or above Linux PC with Pulse Audio (64bit version only) |
|
|
|
Post by cevahir61 on Dec 18, 2020 17:23:34 GMT
[Note:- Widows Application starts in minimized mode, to access application click on wifiaudio app icon in taskbar]WiFiAudio Server for Windows Vista/7/8/8.1 and Windows 10
Download Link for Windows Server
View Attachment
[Note few browsers blocks downloading of "zip" file, if you faced this issue then download the file from link mentioned below and change the extension from "png" to zip]
View Attachment
WiFiAudio Server for Linux 64bit
Download Link for Linux
View AttachmentAfter download execute chmod +x wifiaudio_linux command to add executable permission How to use With this Android application you can use your Android device as a wireless speaker. New Features in Windows Server :- 1) Auto start at bootup 2) Auto discover mobile device (Needs firewall exception for port 32000 in Windows Firewall) 3) Remember last used IP address and auto start audio transmission if IP address is stored. Linux Server :- 1) Auto discover mobile device 2) Movie mode for very low latency audio. How it works: Download Windows or Linux executable on your machine depending on the OS a) Run WiFi Audio Android App and Press start, you will see IP address of mobile device in the bottom after that run Windows/Linux application and put mobile device's IP address in the IP address field and then press start on PC application. Now all audio coming out from PC will be send to mobile device and you will hear audio on mobile device. b) This version also supports auto-discover function it will work in following conditions 1) Users has to allow incoming packets from port 32000 on the PC, For Windows user has to add exception for either application executable or for the port 32000. On Linux following command will add exception for port 32000 iptables -I INPUT -p udp --dport 32000 -j ACCEPT or users can use firewalld to add exception permanently. (Note: to run iptables command root permission is required on Linux) Requirements: Windows Vista or above Linux PC with Pulse Audio (64bit version only) |
|
|
|
Post by wwe551 on Dec 19, 2020 10:29:31 GMT
this app might contain spyware and virus guys, beware the developers make the app close source the first page you see, try alternative soundaudio speaker.
|
|
|
|
Post by Farag on Dec 20, 2020 17:08:58 GMT
[Note:- Widows Application starts in minimized mode, to access application click on wifiaudio app icon in taskbar]WiFiAudio Server for Windows Vista/7/8/8.1 and Windows 10
Download Link for Windows Server
View Attachment
[Note few browsers blocks downloading of "zip" file, if you faced this issue then download the file from link mentioned below and change the extension from "png" to zip]
View Attachment
WiFiAudio Server for Linux 64bit
Download Link for Linux
View AttachmentAfter download execute chmod +x wifiaudio_linux command to add executable permission How to use With this Android application you can use your Android device as a wireless speaker. New Features in Windows Server :- 1) Auto start at bootup 2) Auto discover mobile device (Needs firewall exception for port 32000 in Windows Firewall) 3) Remember last used IP address and auto start audio transmission if IP address is stored. Linux Server :- 1) Auto discover mobile device 2) Movie mode for very low latency audio. How it works: Download Windows or Linux executable on your machine depending on the OS a) Run WiFi Audio Android App and Press start, you will see IP address of mobile device in the bottom after that run Windows/Linux application and put mobile device's IP address in the IP address field and then press start on PC application. Now all audio coming out from PC will be send to mobile device and you will hear audio on mobile device. b) This version also supports auto-discover function it will work in following conditions 1) Users has to allow incoming packets from port 32000 on the PC, For Windows user has to add exception for either application executable or for the port 32000. On Linux following command will add exception for port 32000 iptables -I INPUT -p udp --dport 32000 -j ACCEPT or users can use firewalld to add exception permanently. (Note: to run iptables command root permission is required on Linux) Requirements: Windows Vista or above Linux PC with Pulse Audio (64bit version only) |
|
